Neutrino-Images

Hi forum, I put online update my Zee, but reboot in u-boot? please help. thanks

When your Coolstream Zee is the old version with "nevis" Hardware try this:......

viewtopic.php?f=47&t=16#top

Hi firend, thanks.
How long does it take to upgrade?

Flashupdate Nevis via USB-Stick: Zee, NEO2 and NEO² (NEO's with power switch) Instructions 2011
Official (Coolstreamtech) ZEE & NEO v2 Emergency Flash Instructions

Are required:
1x USB stick (FAT32 formatted)
1. On this USB stick create a directory named "coolstream"
2. In this directory coolstream copy the files below, unpacked files as kernel.img and system.img.
Both are attached as download ...
3. Switch off the switch.
4. Insert the USB stick into the USB port on the front of the device.
5. Start the device.
6. The Power LED will now light "on / off" and then "on", then press the power button on the device.
7. The control light of the USB stick should now flash, indicating that the flash operation has started.
Release the power button.
8. You need a little patience now. After the process has finished, the box will automatically restart.
9. The box should now boot again.

Thanks firend,The process can last more than 2hrs?

I'll wait

lilo74 hat geschrieben: ↑Fr 16. Jun 2017, 20:46 Thanks firend,The process can last more than 2hrs?

No...that's to long i think.....

Are you sure that your usb Stick is right for working with the Zee.....

Is the USB stick recognized by the Zee?

is usb kingston 16gb

look: http://dbox2world.net/attachment/10580-img-0133-jpg/

Have you the possibility to create a logfile of the boot process ?

viewtopic.php?f=14&t=7

files in USB no work?

Try a new format of the USB stick with this tool.....

download/file.php?id=997


Open the exe file of createmini as an administrator and formate the stick.....

friend I create a logfile? in putty.

Thanks and Regards

lilo74 hat geschrieben: ↑Sa 17. Jun 2017, 00:42 friend I create a logfile? in putty.

Have you make a logfile?

Can you show us please....

Have you format your usb sticks with the create mini tool and tryed again...?

when you don't answer we can't help you.....

Thanks friend for all help, I already rebooted it I'm going to put a new picture

friend,a question To put a new image I have to rename files? o update online?

thanks

Update online is the easyest way.

Thans Miky but online send u-boot .

lilo74 hat geschrieben: ↑Sa 17. Jun 2017, 18:39 To put a new image I have to rename files? o update online?

@lilo74

pls put on a usb stick which is recognized by the zee the following steps:

viewtopic.php?f=47&t=16

1x USB stick (FAT32 formatted)
1. On this USB stick create a directory named "coolstream"
2. In this directory coolstream copy the files below, unpacked files as kernel.img and system.img.
Both are attached as download ...
3. Switch off the switch.
4. Insert the USB stick into the USB port on the front of the device.
5. Start the device.
6. The Power LED will now light "on / off" and then "on", then press the power button on the device.
7. The control light of the USB stick should now flash, indicating that the flash operation has started.
Release the power button.
8. You need a little patience now. After the process has finished, the box will automatically restart.
9. The box should now boot again.
In this way, the kernel and / or the system can be restored without a PC!
kernel:

By doing this pls make a logfile:

viewtopic.php?f=14&t=7

This logfile you have to upload here in the board with ending txt. !!!!!

Then the NI guys can see where possibly the error is !!!!

Thanks ncsf and miky, I update online and work fine

Ok guy then everything is allright.....

Wish you Much fun with the image.....