Jetzt zeigt sie mir beim Hochfahren , folgenden fehler an und bringt mir kein Bild mehr auf dem Fernseher.
Im LCD-Display steht "Neutrino 127" mit Putty bekomme ich das angezeigt.
Code: Alles auswählen
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ͻ
▒ U-Boot 2009.03-svn1773 (Nov 02 2010 - 15:25:47) Coolstream HDx ▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
▒ Chipset information ▒
▒ Vendor: Conexant Type: CX2450x (Nevis) Revision: D0 Fuses: 7EFE6D24 ▒
▒ Option: 00010000 max. clock: 600 MHz Core voltage: high ▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
▒ Clock information ▒
▒ MPG0: 594.000 MHz MPG1: 594.000 MHz HD : 593.407 MHz AUD : 491.520 MHz ▒
▒ PLL0: 432.000 MHz PLL1: 594.000 MHz PLL2: 533.333 MHz ▒
▒ CPU : 594.000 MHz from PLL1 ▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
▒ Memory configuration ▒
▒ Start ▒ End ▒ Type ▒ Description ▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ĺ
▒ 00000000 ▒ 0FFFFFFF ▒ RAM ▒ System main memory bank #0 ▒
▒ 10000000 ▒ 17FFFFFF ▒ RAM ▒ System main memory bank #1 ▒
▒ F0000000 ▒ F1FFFFFF ▒ FLASH ▒ Spansion S29GL256P (256 Mbit / 16M x 16) ▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
▒ Serial number: 008-00014151 (08-003747) ▒
▒ *** Warning - bad CRC, using default environment *** ▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
▒ Network configuration ▒
▒ MAC: Conexant VMAC rev. 07 address: 00-C5-5C-00-37-47 ▒
▒ PHY: IC Plus IP101 address: 09 ▒
Error: Bad gzipped data
Error: no valid bmp or bmp.gz image at f0060000
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ͼ
Hit any key to stop autoboot: 0
## Booting kernel from Legacy Image at f0080000 ...
Image Name: NI Nevis Kernel
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2324644 Bytes = 2.2 MB
Load Address: 00048000
Entry Point: 00048000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Linux version 2.6.34.13-nevis (gandharva@Totoro) (gcc version 4.6.4 (crosstool-NG 1.19.0 - Linaro GCC 4.6 2013.05) ) #1 Sat Apr 2 16:48:32 CEST 2016
CPU: ARMv6-compatible processor [410fb764] revision 4 (ARMv7), cr=00c5387f
CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
Machine: CST HDx IRD
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97536
Kernel command line: console=ttyRI0 mtdparts=cx2450xflash:384k(U-Boot)ro,128k(Splash),4096k(kernel),28160k(systemFS) root=mtd3 rootfstype=jffs2 rw mem=384M
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 384MB = 384MB total
Memory: 385008k/385008k available, 8208k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
vmalloc : 0x98800000 - 0xe0000000 (1144 MB)
lowmem : 0x80000000 - 0x98000000 ( 384 MB)
modules : 0x7e800000 - 0x80000000 ( 24 MB)
.init : 0x80048000 - 0x80063000 ( 108 kB)
.text : 0x80063000 - 0x8047f000 (4208 kB)
.data : 0x80480000 - 0x804a1a20 ( 135 kB)
NR_IRQS:352
Console: colour dummy device 80x30
console [ttyRI0] enabled
Calibrating delay loop... 593.10 BogoMIPS (lpj=2965504)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
devtmpfs: initialized
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.22.1.
cfg80211: Calling CRDA to update world regulatory domain
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NetWinder Floating Point Emulator V0.97 (double precision)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
msgmni has been set to 751
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
ttyRI0 at MMIO 0xe0412000 (irq = 2) is a CX2450x UART
brd: module loaded
loop: module loaded
CX2450x MTD driver v1.0 (Apr 2 2016, 16:47:48) (c) Coolstream International Ltd.
cx2450xflash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
cx2450xflash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
4 cmdlinepart partitions found on MTD device cx2450xflash
Creating 4 MTD partitions on "cx2450xflash":
0x000000000000-0x000000060000 : "U-Boot"
0x000000060000-0x000000080000 : "Splash"
0x000000080000-0x000000480000 : "kernel"
0x000000480000-0x000002000000 : "systemFS"
arcvmac arcvmac: ARC VMAC at 0x80484580 irq 24 00:c5:5c:00:37:47
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
cx2450x-ehci cx2450x-ehci.0: Trident CX2450X EHCI USB-Controller
cx2450x-ehci cx2450x-ehci.0: new USB bus registered, assigned bus number 1
cx2450x-ehci cx2450x-ehci.0: irq 13, io mem 0xe8000100
cx2450x-ehci cx2450x-ehci.0: USB 0.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: Trident CX2450X EHCI USB-Controller
usb usb1: Manufacturer: Linux 2.6.34.13-nevis ehci_hcd
usb usb1: SerialNumber: cx2450x-ehci.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
cx2450x-ehci cx2450x-ehci.1: Trident CX2450X EHCI USB-Controller
cx2450x-ehci cx2450x-ehci.1: new USB bus registered, assigned bus number 2
cx2450x-ehci cx2450x-ehci.1: irq 17, io mem 0xe8001100
cx2450x-ehci cx2450x-ehci.1: USB 0.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: Trident CX2450X EHCI USB-Controller
usb usb2: Manufacturer: Linux 2.6.34.13-nevis ehci_hcd
usb usb2: SerialNumber: cx2450x-ehci.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
ALSA device list:
No soundcards found.
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
VFS: Mounted root (jffs2 filesystem) on device 31:3.
devtmpfs: mounted
Freeing init memory: 108K
init started: BusyBox v1.20.2 (2017-03-05 16:37:22 CET)
Jan 01 01:00:02 (none) user.info rcS[41]: start
Jan 01 01:00:02 (none) user.info rcS[41]: creating system directories ...
Fri Jan 1 00:00:00 CET 2016
running /sbin/mknodes
rootdir=/dev
table=<stdin>
done /sbin/mknodes
Jan 1 00:00:00 Coolstream-Sascha syslog.info syslogd started: BusyBox v1.20.2
Jan 1 00:00:00 Coolstream-Sascha user.info rcS[41]: init frontpanel ...
Jan 1 00:00:05 Coolstream-Sascha user.info rcS[41]: mdev coldplug ...
Jan 1 00:00:09 Coolstream-Sascha user.info rcS[41]: init hardware ...
Jan 1 00:00:14 Coolstream-Sascha user.info rcS[41]: init drivers ...
Jan 1 00:00:14 Coolstream-Sascha user.info mdev-mount: [add] mounting /dev/sda1 to /media/sda1
Jan 1 00:00:15 Coolstream-Sascha user.info service[664]: running /etc/init.d/networking start
Configuring network interfaces... udhcpc: option -h NAME is deprecated, use -x hostname:NAME
udhcpc (v1.20.2) started
Setting IP address 0.0.0.0 on eth0
Sending discover...
Sending discover...
Sending discover...
No lease, failing
Starting ifplugd... done.
Jan 1 00:00:25 Coolstream-Sascha daemon.err ifplugd(eth0): started: BusyBox v1.20.2 (2017-03-05 16:37:22 CET)
Jan 1 00:00:25 Coolstream-Sascha daemon.err ifplugd(eth0): using SIOCETHTOOL detection mode
Jan 1 00:00:25 Coolstream-Sascha daemon.err ifplugd(eth0): link is down
Jan 1 00:00:25 Coolstream-Sascha user.info service[691]: running /etc/init.d/ntpdate start
Jan 1 00:00:27 Coolstream-Sascha user.info rcS[41]: run initscripts start ...
Jan 1 00:00:27 Coolstream-Sascha user.info rcS[41]: starting /etc/init.d/S01fstab ...
Jan 01 00:00:27 Coolstream-Sascha user.info S01fstab[756]: mount all local stuff from /etc/fstab
Jan 01 00:00:27 Coolstream-Sascha user.info S01fstab[756]: mount all netfs stuff from /etc/fstab
Jan 1 00:00:27 Coolstream-Sascha user.info rcS[41]: starting /etc/init.d/S53inetd ...
Jan 1 00:00:27 Coolstream-Sascha user.info rcS[41]: starting /etc/init.d/S53vsftpd ...
Jan 1 00:00:27 Coolstream-Sascha user.info rcS[41]: starting /etc/init.d/S55crond ...
Jan 1 00:00:27 Coolstream-Sascha user.info rcS[41]: starting /etc/init.d/S60autofs ...
automount: /var/etc/auto.net is empty, cannot start
Jan 1 00:00:27 Coolstream-Sascha user.info rcS[41]: starting /etc/init.d/S60dropbear ...
Jan 1 00:00:28 Coolstream-Sascha user.info rcS[41]: starting /etc/init.d/S60nfsd ...
Jan 1 00:00:28 Coolstream-Sascha user.info rcS[41]: starting /etc/init.d/S80inadyn ...
Jan 1 00:00:28 Coolstream-Sascha user.info rcS[41]: starting /etc/init.d/S99NI99emmrd ...
Jan 1 00:00:28 Coolstream-Sascha user.info rcS[41]: starting /etc/init.d/S99NI99emu ...
Jan 1 00:00:28 Coolstream-Sascha user.info rcS[41]: starting /etc/init.d/S99NI99fritzcallmonitor ...
Jan 1 00:00:28 Coolstream-Sascha user.info rcS[41]: starting /etc/init.d/S99djmount ...
Jan 1 00:00:28 Coolstream-Sascha user.info rcS[41]: starting /etc/init.d/S99samba ...
Jan 1 00:00:28 Coolstream-Sascha user.info rcS[41]: starting /etc/init.d/S99tuxcald ...
Jan 1 00:00:28 Coolstream-Sascha user.info rcS[41]: starting /etc/init.d/S99tuxmaild ...
Jan 1 00:00:28 Coolstream-Sascha user.info rcS[41]: starting /etc/init.d/S99ushare ...
Jan 1 00:00:28 Coolstream-Sascha user.info rcS[41]: starting /etc/init.d/S99xupnpd ...
Jan 01 00:00:28 (none) user.info rcS[41]: done
Jan 1 00:00:28 Coolstream-Sascha daemon.info init: starting pid 806, tty '': '/etc/init.d/start_neutrino'
Please press Enter to activate this console. [neutrino] Coolstream HD1 framebuffer Instance created
>FBACCEL::INIT
[fb_generic] [CX2450X] framebuffer 14400k video mem
[fb_accel_cs_hd1] 14400k video mem
[fb_accel_cs_hd1] 1280x720x32 line length 5120. using CX2450X graphics accelerator.
KAL Trace Initializaing ...
KAL Trace init Complete
KAL mmap'ings:
cached[0] = 0x31bd8000 (0x01400000)
uncached[0] = 0x31dd8000 (0x06c00000)
content[0] = 0x37cd8000
cached[1] = 0x3d0d8000
uncached[1] = 0x3d0d8000
content[1] = 0x3e4d8000
CSAPI (VIDEO): video init: 1
CSAPI (API): CST API coolstream-mt-2.6gitb98d83f initialized on Rev. 8 Serial Nr 216998927677255
neutrino: symbol lookup error: neutrino: undefined symbol: _Z16cs_get_chip_typev
Neutrino exited with exit code 127
Mit freundlichen Grüßen
bigking94
